Furuno DWF-200M Washer User Manual


 
13
HOW TO CLEAN THE FILTER
Cleaning the Lint Filter
Cleaning the drain filter
In case "Pump-Model" drain hose, this filter’s equipped at the back side of washer.
This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could
be caused.
1Pull the Fiter frame up-
ward.
2Turn the lint filter inside
fout, wash to the lint of
3Return the filter as it was,
and insert the filter frame
1Pull the power
plug out before
cleaning it.
2Turn off the water
supply to the
washer and
sperate the inlet
hose.
3Pull the inlet filter
out.
4Remove the dirt
from the inlet
filter with a brush.
1Put down the remained
water in the hose. And
put a container under the
2Turn the cap counter 3Pull out the filter
assembly.
4Clean the drain filter. 5Put in the filter along the
guiding prominence of
the case. Please note the
left position of the filter
adjusting the groove to
the guide rib.
6Turn the cap clockwise
Cleaning the water inlet filter
Clean the filter when water leaks from, the water inlet.
with water
Filter Frame
Lint Filter
filter to collect water .
FILTER
CONTAINER
clockwise.
CAP
CASE
FILTER
CAP
CAP
FILTER
CASE
GUIDE
RIB
SUIT
into the slot
CAP
tightly.
CAP
DWF-200/240M(101) 97.1.19 4:22 PM ˘`13