Filter
Top Products
11
OPERATING INSTRUCTIONS
Cycle Selection, continued
NSF Protolcol P351
Allergen Reduction Performance
of Residential and Commercial,
Family-Sized Clothes Washers
The Allergy cycle will kill all dust mites and eliminate
at least 95% of pet dander. Since higher temperatures
are required, please check fabric care labels to prevent
damage. Sanitize and Hot temperatures settings are
available.
Normal
The Normal cycle provides 15 minutes of reversing
tumble wash action for normally soiled loads. Stain
Clean, Fresh Water Rinse, and Energy Saver are
available options. All wash temperatures except Sanitize
(on select models) and all soil levels are available.
Casual
Casual cycle provides 10 minutes of reversing tumble
wash action for cottons and blends with a no-iron fi nish
followed by a Cool Down rinse, 2 additional rinses and
a fi nal spin. Fresh Water Rinse and Stain Clean can
be selected.
Quick Wash (on select models)
The Quick Wash cycle provides 5 minutes of reversing
tumble action to quickly wash small, lightly soiled loads
in 20 minutes. A warm wash/cold rinse is available and
you can choose between Max and High spin speeds.
Delicates
This cycle provides 10 minutes of gentle reversing wash
action for knits and delicates. To protect your delicate
items, Hot water wash and Heavy Soil options are not
available. The Stain Clean and Fresh Water Rinse
options are available.
Rinse & Spin
Select Rinse & Spin for loads that need a cold water
rinse or to add fabric softener that may have been
omitted in a regular cycle. Add the fabric softener
to the dispenser chamber. Select the spin speed
appropriate for the load.
Spin Only (on select models)
Use the Spin Only cycle anytime you want to drain
water from the washer and spin out the load or as a
follow-up to a No Spin selection. Select the spin speed
appropriate to the load.
Cycle Settings
WASH/RINSE WATER TEMPERATURE
Follow the fabric care label instructions
on items to be washed.
For best results
To change the temperature, press the Temp button
to scroll to the desired setting. Select a wash water
temperature according to fi ber content, colorfastness and
soil level. A cold water rinse saves energy and reduces
wrinkling.
To protect your fabrics, not all temperatures are available
with every cycle. The indicator will not light if the setting
is not available with that cycle.
The temperature selected for the cycle will be
remembered and recalled each time that cycle is selected
in the future. To return to factory settings, press the
Start/Pause and Select buttons at the same time and
hold until the signal sounds.
Í
NOTE
To change the temperature once the cycle has begun,
press the Pause button, make the new selection and
press Start again.
Auto Temp wash water temperatures are automatically
regulated to maximize detergent effectiveness and
improve washing performance. The water heater setting
and its distance from the washer, water usage in other
parts of the home, and seasonally low ground water
temperature in some geographic areas can affect water
temperature.