Filter
Top Products
18
Note: If you wish to change any of the wash options while your AquaSmart™ is running please
press START/PAUSE then select the required option.
Auto drain
Unsupervised clothes washers filled with water can present a drowning hazard to small children.
In order to minimise any risk of this type of accident, your AquaSmart™ has been
pre-programmed to know when this hazard is created, and drain the wash water to a safe level.
If you pause your AquaSmart™ at any time during the wash cycle when there is water in the
bowl, the machine will activate the AUTO DRAIN function after 3 minutes. This will drain the
water in the wash bowl to an acceptable level, removing any potential hazard.
Your washer will beep to warn you prior to AUTO DRAIN being activated.
If you wish to soak clothing items during the wash process please select the SOAK option. This
will provide you with a two hour soak.
Lid lock
Your AquaSmart™ washer is able to lock its lid during hazardous parts of the wash cycle, to
provide extra safety for you and your family while it is operating.
The Lid Lock symbol (padlock) appears in the left hand side of the control panel, letting you
know at a glance if you can open the lid or not.
To unlock the lid at any time press START/PAUSE.
The lid will be unlocked during the initial phase of the wash. This will enable you to pre-dissolve
detergent and add or remove clothing before the wash begins.
If the lid is left open, your AquaSmart™ washer will be unable to lock the lid, and the cycle will
be halted. The machine will beep and the Lid Lock symbol will flash to alert you. If this occurs,
ensure that the lid is closed and press START/PAUSE.
Important!
Do not put anything down the Lid Lock slot in the top deck.
Do not try to disable the Lid Lock.
Ensure that children or infirmed persons are well supervised when around your AquaSmart™
washer, especially when you are using hot water, as the lid can be opened during the fill portion
of the cycle.
Changing the wash cycle options