Fisher & Paykel WL80T65D Washer User Manual


 
17
Changing the wash cycle options
Wash cycle options explained
Delay Start
The Delay Start option allows you to delay the start of the wash cycle for 1, 3 or
9 hours. This can be useful to time your washing to finish when you arrive home
from work, or to start once you have finished in the shower.
Simply press the DELAY START button to scroll through the time options. When
no lights are shown, Delay Start is off. Once DELAY START has been selected the
START/PAUSE button will cease flashing and the Delay Start count down timer
will start automatically.
Note: We suggest that you avoid using Delay Start for damp, non-colourfast
items as this may cause dye to run.
Soak
The Soak option adds a 2 hour soak into the middle of the wash phase of the
cycle. During the soak, the washer will agitate for a few seconds every minute. At
the completion of the soak period the AquaSmart™ will then complete the rest
of the wash cycle. To select Soak, press the SOAK button once to select Soak ON.
Note: Once the Soak is under way you can exit out at any time by pressing the
SOAK button. This does not apply to BULKY cycle. For BULKY cycle to exit SOAK
press ADVANCE.
Wash Advance
There may be times when you wish to use the rinse and spin or spin only stages
of the wash cycle. The Advance option allows you to fast forward your cycle to
the desired location. Press the ADVANCE button repeatedly to advance the cycle
to the desired position, then press START.