Filter
Top Products
22
The Options
8. Max Spin Speed
This option allows you to change the auto sensing spin speed from
fast (1000 rpm) down to medium (670 rpm).
9. Water Levels
Your Intuitive washer can automatically select the right water level
for the load. As your machine fills it will pause occasionally to sense
the water level. The machine will check if the water level is correct
by using a series of 2 different agitate strokes. A slow stroke to sense
the load and an agitate stroke to mix the load (this may take over a
minute). If it detects that the water level is not high enough, it will fill
with more water and recheck.
Your washer may occasionally add water during agitation. This is
to maintain the water level due to the release of air trapped in
the garments.
For some loads you may want to manually select the water level.
When washing an unusual load, such as large bulky garments or
pillows, we recommend you manually select the water level or use
the COMFORTER lifecycle.
The agitator has five levels marked on its stem that can be used to
help you select the correct water level. The mark nearest to the top
of the clothes indicates the water level you should select. The levels
marked on the agitator are a guide for the dry clothes and do not
correspond exactly to the water level. Selecting a water level that is
too high can cause out of balance loads, tangling or splash-over.
If there is already water in your Intuitive, before you start your wash,
there may be a short pause before it starts washing. Depending
on the amount of water in the bowl it may automatically start the
detergent activating wash (without adding any more water) or move
straight to the agitation wash if there is a lot of water in the bowl.
10. Traditional Wash
Your Intuitive washer can be set to a ‘traditional’ top loading
wash, where the clothes are agitated in a bowl full of water at the
temperature you have selected.
Select Traditional wash ON.