Fisher & Paykel GW612 Washer User Manual


 
17
Wash Options
Soak
Model Only
Use the Soak option to soak clothes at the end of the
wash phase or when you wish to re-use the wash water.
When you select Soak your Smart Drive® will soak for
a period of 2 hours before completing rinse and spin.
During soak your Smart Drive® will agitate for a few
seconds every minute.
Nappy Sanitisers/ Bleach
Nappy sanitisers and bleach are very corrosive to metal
surfaces. DO NOT use your Smart Drive® to soak items
in bleach or sanitiser, or tip the contents of the nappy
bucket into your machine. Rinse and wring items out
thoroughly before placing them in your machine.
Spin Hold
Use the Spin Hold option to:
Remove drip dry garments from a mixed load before the
wash goes into spin.
Minimise the clothes creasing when they are left to sit in
the bottom of the bowl at the end of the cycle.
When you have selected Spin Hold, your Smart Drive®
will pause at the end of rinse, beep and the spin light will
flash to tell you that it is waiting for another instruction.
Press START/PAUSE to begin the spin.
Delay Start
Model Only
Delay Start will delay the start of the wash cycle
for 1, 3 or 9 hours.
Press DELAY START once for a delay of 1 hour. Press
again for 3 hours, a third time for 9 hours (and again to
return to normal).
Once you press Delay Start your Smart Drive® will begin
the delay period, you do not have to press START/PAUSE.
Be careful if using Delay Start for non-colourfast clothes
as dyes may run if the clothes are damp.
Your Smart Drive® will not beep at the end of the cycle if
Delay Start is selected.