Fisher & Paykel DEIX1 Clothes Dryer User Manual


 
8
Installation Instructions
Read the Important Safety Instructions on pages 5 – 7 before you start installing the dryer.
Location Requirements
The dryer must not be stored or installed in an area that is exposed to water or the weather.
It must be installed in a well-ventilated location. Do not install it in any room or cupboard which
does not permit the free flow of replacement air.
It must exhaust air outside.
Before installing the dryer ensure that there is sufficient height to fully open the lid.
Allow sufficient room behind the dryer for the exhaust.
The air intake is at the rear of the dryer. Ensure that there is a sufficient air passage on each side
of the dryer for intake air.
Exhaust Outlet Location
352mm 333mm
Exhaust outlet
111mm
Does not include
foot height
Note:
These are dimensions looking at the back of the dryer. When looking at the wall to cut the duct
hole, dimensions will be the mirror image of these.
1412 – 1428mm
925 – 955mm
700mm
1010 – 1050mm
685mm