Filter
Top Products
27
washing machine
safety and troubleshooting
If you experience any problem while using your
washing machine, you might be able to solve
it by following the instructions below.
If you are not successful unplug the machine
and contact TECHNICAL SUPPORT.
Do not open the back of the machine
under any circumstance. There aren’t
any user-replaceable fuses or similar
components inside.
TROUBLESHOOTING
Why is the washing machine not
starting up?
This may happen due to the following:
The machine is not connected to the wall
outlet, or there is no voltage present at the
outlet.
The Start/Pause button has not been
pressed.
The machine’s door has not been closed
properly, the display shows the message
“Door open!” for 4 seconds, and the
following message appears at 2-second
intervals: Close the door.
Check that the door is firmly closed.
Why is the machine vibrating or making
excessive noise?
The cause could be one of the following:
The lock and transport screws have not
been removed.
The machine has not been correctly leveled
when placed on the floor.
During the spin cycle, the motor makes a
“whistling” noise, which is normal, due to
the motor’s mechanical drive.
DOOR OPEN!
Close the door
Important!