Filter
Top Products
16
ON
OFF
DELICATE
NORMAL
QUICK START REFERENCE
(Refer to pages 9 and 10 for detailed operating instructions.)
RECOMMENDED PROGRAMS AND TEMPERATURE SETTINGS
The table below is intended to help you determine which program is best for each type of load.
Fabric Type Program
Temp
Setting
Load
Size
Heavy cottons and denims Extra Dry Normal Full
Cottons and linens w/out elastic and/or
decorative trim, white and colorfast items
Normal Normal Full
Fabric Type Program
Temp
Setting
Load
Size
White and colorfast perma press Normal Delicate Half
White and colorfast items that require
ironing
Iron Dry Delicate Half
Polyester/acrylic blends, rayon, acetate Damp Dry Delicate Half
Washable silk and nylon Damp Dry Delicate Third
Fabric Type Program
Temp
Setting
Load
Size
Heavy cottons and denims 60' Normal Full
Cottons and linens w/out elastic and/or
decorative trim, white and colorfast items
40' Normal Full
White and colorfast perma press 40' Delicate Half
White and colorfast items that require
ironing
20' Delicate Half
Polyester/acrylic blends, rayon, acetate 20' Delicate Half
Washable silk and nylon 20' Delicate Third
Timed
Synthetics
Cottons/Linens
On/Off Button
This button turns the power to the
machine on and off.
Delicate/Normal Button
This button lets you select between a normal
and low drying temperature. Press it in to
select the Delicate (low) temperature and
release it to select normal.
Program Knob
To select a program, turn the program knob to the 12:00
position (where the line on the knob aligns with the dot at
the top of the dial). Wait for a short tone then turn the
Program knob to the desired program. After a brief pause,
another tone will sound and the program will begin.
The programs on the right of the dial are for cottons and
linens. The programs on the bottom are for synthetics.
You can also set a timed dry program for 60, 40 or 20
minutes (on top left of dial).
Power Indicator Light
When you press the On/Off button, this light will glow. It
will continue to glow during the program. At the end of
the program, it will flash and an end-of-program tone will
sound to indicate the program is complete. The light will
continue to flash until the door is opened or the Program
knob is turned to the 12:00 position.