Filter
Top Products
Attaching Iron to the Ironing Board
Your Steam Station is equipped with a clamp that can be used to attach the iron stand (8) to
your ironing board (or any other suitable surface). (Fig. 10)
• Rotate the clamp 90°, so that it points down.
• Place the iron stand (8) next to the edge of the table with the clamp on the bottom.
• Turn the wing nut clockwise and then tighten it to the ironing board or table.
• Reverse the process when finished ironing to remove the Steam Station from the ironing
board or table.
Fig. 10
SCREW
CLAMP
WING
NUT
IRONING BOARD
11