Filter
Top Products
5
IMPORTANT
Resetting After Auto Shut-Off
The auto shut-off safety function of your EURO-PRO EP480 Iron is designed to engage after
approximately 8 minutes of non use. The blue indicator light will flash when the auto shut-off has
activated.
To reset your iron and continue ironing follow these steps.
1) Lift iron from stand.
2) Holding the iron horizontally in front of you, gently rock the iron back and forth several times.
This motion will reset the safety switch inside the iron. Do not shake the iron.
• The red temperature light will illuminate when the auto shut-off system has been reset.
• Allow time for the iron to re-heat.
• The red indicator light will go out when the iron is ready for use.
Caution: Do not use the auto shut-off feature as a substitute for turning the
iron off and unplugging the iron when not in use.