Filter
Top Products
9
You can change the delay time at any moment,
before you press the Start/Pause button.
If you have already pressed the Start/Pause button, and
you wish to cancel the delay time, proceed as follows:
• set the washing machine to Pause by pressing the
“Start/Pause” button;
• press the “Delay Time” button until the display shows
the symbol «
00’’
».
• press the “Start/Pause” button again.
Important!
The door will be locked throughout the delay time (the
“Door” light will be on).
If you need to open the door, you must first set the
washing machine to Pause by pressing the
“Start/Pause” button. The “Door” light goes off and
the door can be opened.
After you have closed the door, press the “Start/Pause”
button again.
8 “Start/Pause” button
This button has two functions:
• Start: after you have selected the desired programme
and options, press this button to start the washing
machine. The light above the button will stop flashing
and remain lit.
• Pause: when you press this button again, the
programme in progress is interrupted. The light above
the button will start flashing. To restart the
programme, press the button again.
Important! You must set the washing machine to
Pause before you make any change in the programme
in progress.
10 Programme phase indicator
lights
When you select a programme, all the pilot lights are
off.
After you have started the programme, the “Washing”
and the “Door” lights illuminate and will remain lit.
At the end of the programme, the “Washing” light goes
off, the “End cycle” light illuminates and the “Door”
light goes off. It will be possible to open the door.
When the “Door” light is on, the door is locked and is
not possible to open it.
Washing
Door
End cycle
132978490.qxd 22/09/2006 14.06 Pagina 9
Ofrecido por www.electromanuales.com