Filter
Top Products
44 operating problems
The E20 error code ap-
pears in the display** and
the Start/Pause pushbut-
ton flashes red*** :
• the drainage filter is obstructed,
• the drain hose is blocked or bent,
• the drain hose is fixed too high (see “Installa-
tion” section).
• the drainage pump is blocked,
• the standpipe is blocked.
The E10 error code ap-
pears in the display** and
the Start/Pause pushbut-
ton flashes red*** :
• the water inlet tap is closed,
• the water supply has been cut off.
The EF0 error code ap-
pears in the display** and
the Start/Pause pushbut-
ton flashes red*** :
• the drainage filter is obstructed,
• the anti-flooding security system has been acti-
vated, please proceed as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before
unplugging,
- call the after-sales service.
The drainage pump runs
constantly, even when the
appliance is inactive :
• the anti-flooding security system has been acti-
vated, please proceed as follows :
- close the water inlet tap,
- empty the appliance for 2 minutes before
unplugging,
- call the after-sales service.
Softener runs directly into
the drum when filling the
dispenser box :
• you have gone past the MAX indicator.
* Depending on model.
**On some models, the audible signals can sound.
*** After solving any problems, press the ‘Start/Pause’ pushbutton to restart the
interrupted programme.
Problems Causes