Electrolux WASL3T100 Washer User Manual


 
how to run a wash cycle 33
progress, the appliance will ignore the
new selected programme. “Err” flashes
and the “Start/Pause” pushbutton
flashes red for a few seconds then the
current cycle display reappears.
Selecting the temperature
Press the “Temperature” pushbutton
repeatedly to increase or decrease the
temperature if you want your washing to
be washed at a different temperature to
the one selected by the appliance. The
symbol means a cold wash.
Selecting the spin speed
Press the “Spin”
pushbutton to chan-
ge the spin speed, if you want your
washing to be spun at a different speed
to the one selected by the appliance.
You can also select “No spin” *, “Rin-
se hold”
*
or “Night silence plus” *.
The maximum speeds are :
for Cottons, Eco : 1500 rpm,
for Jeans : 1200 rpm,
for Handwash, Wool : 1000 rpm,
for Synthetics, Easy iron, Lingerie,
Sport: 900 rpm,
for Delicates, Silk : 700 rpm.
At the end of the programme, if you have
selected “Rinse hold” or “Night silen-
ce plus” , you then need to select a
“Spin” or “Drain” programme to fi-
nish the cycle.
“No spin”
The water will be drained without
spinning.
“Night silence plus”
The washing machine does not empty
the water after the final rinse which pre-
vents the washing from creasing. Be-
cause there are no spin cycles, the
washing programme is very quiet and
can be selected at night. In Cotton and
Synthetics programmes, the rinsing cy-
cle uses more water.
“Rinse hold”
The washing machine will not drain the
water from the last rinse, so will not
crease the laundry.
Selecting options
You must select the different options af-
ter selecting the programme and before
pressing the “Start/Pause” pushbutton
(see “Programme table”).
Press the desired button(s) ; the corres-
ponding lights come on. If pressed
again, the lights go out. If one of the op-
tions is not compatible with the selected
programme, “Err” flashes on the display
and the “Start/Pause” pushbutton
flashes red.
*depending on model
60
1200