Filter
Top Products
41
Something not working?
Spinning starts late or the
machine does not spin
The unbalance detection If the laundry is not evenly
device that prevents distributed inside the drum
excessive vibration during at the beginning of the
spinning has cut in. spin cycle, the machine
detects this and tries to
redistribute it more evenly
by means of a few drum
rotations.
Only when the laundry is
more evenly distributed
will the spin cycle be
performed, at a lower speed,
if the laundry is not evenly
distributed.
If, after about 6 minutes,
the laundry is still tangled,
the machine will not spin.
Therefore, if the laundry is
still wet at the end of the
cycle, it is advisable to
redistribute it manually
inside the drum and to
select the spin programme
again.
Problem Possible cause Solution
The machine will not dry or
the laundry is not dry
enough
The water tap is not open Open the water tap.
(E10).
The drying time has not Select the drying time.
been selected.
An appropriate drying pro- Select the appropriate
gramme or drying time drying time suitable for the
have not been chosen. required degree of drying,
according to the type of
fabric (cottons or easy-cares).
There is too much laundry Reduce the load.
inside the appliance.
132984531.qxd 28/11/2005 16.32 Pagina 41