Electrolux 12710 VIT, 14710 VIT Washer/Dryer User Manual


 
To empty out water:
select the DRAIN programme to empty out the water without spin-
ning.
• select the SPIN programme for draining and spinning.
• select the SPIN SPEED and depress the START/PAUSE button;
Warning! The programme selector dial must be turned first to RESET
and then to the DRAIN or SPIN programmes.
The RINSE HOLD option cannot be selected for the automatic WASHING &
DRYING programme.
PREWASH
The machine performs a prewash cycle at 30°C max. The prewash cycle ends
with a short spin in programmes for Cotton and Easy-cares, and with emp-
tying of the water only for Delicates.
This option is not available with the wool programme and cannot be used
with STAIN.
For use when washing heavily soiled laundry.
STAIN
To treat heavily soiled washing or stained washing with stain remover
(extended main wash with time optimised stain action phase, not selectable
for wool/handwash or programmes with temperatures lower than 40°C).
This function cannot be used with PREWASH.
QUICK
By pressing this button the washing time is reduced. For use when washing
lightly soiled laundry.
This option is not available with the wool/handwash and Economy pro-
gramme.
EASY IRON
Selecting this button the laundry is gently washed and spun to avoid any
creasing. In this way ironing is easier. Furthermore the machine will perform
6 rinses instead of 3 for cotton and 4 rinses instead of 3 for synthetics. This
function can be used only for cotton and Easy-Cares (synthetic) fabrics.
If this option is selected for cotton programmes, the spin speed automaticaly
will reduce to 900 rpm.
If this option is selected for synthetic programmes with a temperature of
60°C, the machine will perform a washing cycle at max 40°C.
15
Description of the appliance
132984531.qxd 28/11/2005 16.32 Pagina 15