Filter
Top Products
Troubleshooting
31
Carrying out an emergency emptying
1 Warning! Isolate the washing machine from the mains supply before
the emergency emptying!
If the washing machine no longer pumps out the water an emergency
emptying must be carried out.
Warning! The water, which flows out of the emergency emptying hose
can be hot. First allow the water to cool down before emergency
emptying!
0 Put down a flat container to catch the water draining out.
0 Pull down the flap in the left corner
of the base strip and remove it.
0 Release the emergency emptying hose
from its holder.
0 Pull the emergency emptying hose out
a little.
0 Place a container underneath to
catch the water.
0 Release the plug of the emergency
emptying hose by turning it anti-
clockwise and pull it out.
The water will drain out. Depending
on the amount of water, it may be
necessary to empty the container
catching the water several times.
To do this, temporarily close the
emergency emptying hose again with the plug.
When the water has drained out completely:
0 Push and twist the plug firmly back into the emergency emptying hose.
0 Push the emergency emptying hose back in a little and let it catch on
to the holder.
0 Replace the flap in the base plate and close it.
3
When the washing machine is completely empty, the ÖKO lock can no
longer function correctly. Therefore before the next wash pour in approx
1 litre of water (pour it in through the washing powder compartment).