Filter
Top Products
18
Run wash cycle
Brief instructions
A washing cycle proceeds in the following steps:
0 Check whether the water tap is opened.
0 Open the door, load the washing.
0 Shut the door.
0 Add washing powder/conditioner.
0 Set the correct washing program and temperature.
0 Press EASY-CARES button if required.
0 Pull out program selector.
Washing program starts automatically after six seconds.
0 Alter the final spin speed or select RINSE HOLD if required.
You can alter this setting and the temperature during the entire
washing cycle.
When the washing cycle has finished:
Important! If the washing cycle ended with Rinse Hold, before opening
the door, carry out a PUMP OUT, SPIN or SHORT SPIN.
0 Open the door, remove the washing.
0 Push in the program selector.
The washing machine is then switched off.
0 We recommend you unplug the appliance and turn off the water
supply when the wash program has finished.
Loading the washing
0 Sort and prepare washing according to type.
3
For information on correct preparation of the washing, see "Types of
washing and care symbols."
0 Open door: pull the handle of the door.
0 Load the washing.
3
Maximum load see "Program tables" in the
following chapter.
0 Firmly shut the door.
Caution! When closing the door do not catch any pieces of laundry!
Textiles or the appliance could be damaged.