Electrolux LAVAMAT 16810 Washer/Dryer User Manual


 
Instructions for installation and electrical connection
Safety instructions for the installer
• This appliance is heavy, care should be taken when moving it.
When unpacking the appliance, check that it is not damaged. If in
doubt, do not use it and contact the retailer.
All internal packing must be removed before using the appliance.
Serious damage may be caused to the machine or adjacent furniture
if the protective transit devices are not completely removed. Refer to
the relevant paragraph.
Any electrical work required to install this appliance must be carried
out by a qualified electrician or competent person.
• Any plumbing work required to install this appliance must be carried
out by a qualified plumber or competent person.
After having installed the machine, check that it is not standing on
its electrical supply cable.
• If the appliance is placed on a carpeted floor, ensure that air can cir-
culate freely between the adjustable feet and the floor.
The installation should comply with local water authority and build-
ing regulations requirements.
Should the appliance power supply cable need to be replaced, this
should be carried out by our Service Force Centre.
47
132994040.qxd 1/22/03 9:16 AM Pagina 47 (Nero/Process Black pellicola)