Filter
Top Products
21
Washing cycle complete/Removing the washing
At the end of the programme PLEASE TAKE OUT THE CLOTHES appears
in the display. As soon as the
§ symbol appears, the door can be
opened.
1.Open the door using the handle.
2.Remove the washing.
3.Close the water tap.
4.Switch off the appliance.
If Rinse Hold has been selected:
1.Press the START key.
The display automatically
changes to the first pro-
gramme page. Depending
upon the programme that
has been running either SPIN
or SHORT SPIN is highlight-
ed.
If spinning or draining is required:
Use the control knob to
highlight either
– SPIN or
– DRAIN.
2.Reduce the spin speed, if
necessary. The spin speed
cannot be increased. This
protects the fabric.
3.Press the START key.
The washing is spun or the water is drained.
3 If OVERDOSING is shown in the display at the end of a wash cycle, too
much detergent was used in the completed wash programme. Please
take note of the dosage instructions provided by the detergent manu-
facturer and the amount of washing loaded the next time you wash.
DELICATES 30°C
RINSE HOLD 11:28-11:28
§
START
RINSE HOLD
######################
RINSE H.
SHORT SPIN
1200 RPM 12:28-12:34
ú
START
EASY IRON
REFRESH
1200
FASHION
SHORT SPIN)
OPTIONS SPIN
SPIN
1200 RPM 11:28-11:39
ú
START
FASHION
SHORT SPIN
1200
SPIN)
STARCH
OPTIONS DRAIN