Filter
Top Products
Operating Instructions
19
Run wash cycle
Brief instructions
To run a wash cycle proceed as follows:
0
1.
Check whether the water tap is open.
2.
Open the door, load the washing.
3.
Shut the door.
4.
Add detergent/conditioner.
5.
Set the correct washing program:
set the program on the program selector;
set the temperature on the temperature selector;
press the desired additional button to select the type of washing.
6.
Press the ON/OFF button.
The washing machine is switched on. The washing program starts.
7.
If applicable change final spin speed/select RINSE HOLD.
You can change this setting and the temperature during the entire
washing cycle.
After the washing program has finished:
Important!
If the washing cycle ends with rinse hold, before opening
the door carry out a PUMP OUT or SPIN.
8.
Open the door, remove the washing.
9.
Press the ON/OFF button!
10.
Close the water tap.
We recommend you unplug the appliance and turn off the water sup-
ply when the wash program has finished.