Filter
Top Products
Installation
Unpacking
All transit bolts and packing must be
removed before using the appliance.
You are advised to keep all transit
devices so that they can be refitted if the
machine ever has to be transported
again.
1. Using a spanner unscrew and
remove the rear right bolt. Lay the
machine gently on its back, making
sure that the hoses are not
squashed.
2. Remove the polystyrene base and
take off the bottom panel by
unscrewing the central screw..
3. Carefully slide out the right polythene
bag.
P0457
P0255
4. Repeat the operation for the left and
central polythene bags.
5. Re-fit the bottom panel using the 4
screws supplied with the door
hinges (in the plastic bag) and the
previously removed screw.
6. Set the machine upright and remove
the two remaining bolts from the
back.
P0453
P0016
P0015
installation electrolux 37
132974850 EN.qxd 26/10/2007 11.18 Pagina 37