Filter
Top Products
2 hours and then by 1 hour up to a
maximum of 20 hours by pressing this
button.
Selecting the delayed start.
• Select the programme and the
required options.
• Select the delay start.
• Press the «Start/Pause» button: the
machine starts its hourly countdown.
The programme will start after the
selected delay has expired.
Cancelling the delayed start
• Press the «Start/Pause» button.
• Press the «Delay» button, the symbol
0’ is displayed.
• Press the «Start/Pause» button
again.
The Delay cannot be selected with
Drain programme.
Display
The display shows the following
information:
Duration of the selected
programme
After selecting a programme, the
duration is displayed in hours and
minutes (for example
2.05).
The duration is calculated automatically
on the basis of the maximum
recommended load for each type of
fabric.
After the programme has started, the
time remaining is updated every minute.
2.05
Selected drying time
After selecting a drying programme the
drying time is shown in minutes or
hours and minutes (max
130 mins).
After the programme has started the
remaining time is updated every
minute.
Washing programme phase icons
By selecting the wash programme, the
washing or drying programme phase
icons corresponding to the various
phases making up the programme are
shown in the bottom of the display.
After you have pressed the
«Start/Pause» button and the machine
has started, the «Door locked» pilot
light is on and only the phase running
icon stays on.
When the programme has finished, 3
flashing zeros «
0.00» appear on the
display.
Delay
The selected delay (20 hours max) set
by pressing the relevant button appears
on the display for about 3 seconds, then
the duration of the previously selected
programme is displayed.
The delay time value decreases by one
unit every hour and then, when 1 hour
2.05
2.05
14 electrolux use
132974850 EN.qxd 26/10/2007 11.18 Pagina 14