Filter
Top Products
CARE AND CLEANING
You must DISCONNECT the appliance
from the electricity supply, before you
can carry out any cleaning or
maintenance work.
The dispenser needs to be cleaned
regularly, preferably after each wash.
Inspect the dispenser after each wash to
see if there is any residue of detergent.
To do this proceed as follows:
Rotate Selector knob to “O” position.
What To Do After You Have
Finished Your Washing.
Cleaning The Dispenser
Cleaning The Lint Filter
Switch off the electricity at the power
point.
Leave lid open for a while. This allows
time for moisture inside the washing
machine to evaporate and for any
odours to disperse.
Pull the dispenser drawer forward
until it stops.
Remove the filter column from the
centre of the agitator.
Before replacing the dispenser back
in its recess, clean the inside of the
drawer with an old toothbrush.
Put the dispenser back into its
runners and close the drawer.
Lift the front of the drawer up and
forward to remove it from the runners.
Clean the dispenser drawer with hot
water and a brush, eg. an old
toothbrush.
Dry the drawer.
Turn off the water taps.
Lint is a collection of threads and fluff
which comes off your clothes during
washing.
Your washing machine collects this lint
in the lint filter. It is important to clean
out this lint filter, preferably after each
wash.
How to clean the lint filter :
22