Filter
Top Products
Dirt Level button
There are 3 dirt levels to choose from:
såHeavy for heavily soiled clothes eg. very dirty
work clothes and overalls
såMedium for everyday soiled items eg family
clothes, sheets etc
såLight for lightly soiled clothes, just to freshen
them up
The Dirt Level lets you have an influence on the wash time
of the selected program.
Press the Dirt Level button if you want to increase or
decrease the wash time.
For the same wash program, Heavy will have a longer wash
time than Medium, and Medium a longer wash time than Light.
Water Level button
0RESSINGåTHEå7ATERå,EVELåBUTTONåALLOWSåYOUå
to choose the water level to be used for your
wash.
You can select:
Wkje sensing
or a manual water level
så(IGH
så-EDIUM
så,OW
Auto sensing is the default selection for each wash to help
you save water.
tips and information
Do not overfill the washing machine.
7HENåCHOOSINGåAåMANUALåWATERåLEVELåUSEåONLYåTHEåAMOUNTå
of water you need for the wash load. If you are unsure what
level to choose, select auto sensing and the machine will
automatically fill with water to the correct level for you.
Auto sensing water level
Selecting the auto sensing water level option ensures you
will use just the right amount of water for the wash load.
7HENåYOUåSTARTåYOURåWASHåPROGRAMåTHEåMACHINEåWILLå
conduct a series of water fill and short agitations to
determine the amount of water needed. will show in the
digital display.
will disappear and automatically normal wash agitation
will commence when there is sufficient water in the bowl.
If you add more clothes to the washbowl after an auto
sensing water level wash program has started, the machine
will auto sense the new load and add extra water if needed.
For auto water level, the amount of water the machine
determines for a load is an optimised level. You can adjust
the auto level to be a small amount above or below the
optimised level if you consider the amount of water you
normally get using the auto option is too high or too low. To
do this, see ‘Customising the auto sensing water level’ on
page 12.
Checking the water level
7HENåTHEå7ATERå!IDåRECIRCULATIONåSYSTEMåISåACTIVEåANDåTHEå
agitation of washing has started, you can open the lid to
check the working water level in the washbowl.
!FTERåOPENINGåTHEåLIDåTHEå7ATERå!IDåRECIRCULATIONåPUMPåWILLå
continue to run for 10 seconds. Check the water level being
used for your wash during the time the pump is running.
If you do not close the lid after 10 seconds, the pump will
stop and the water level in the washbowl will begin to drop.
If the lid is left open, the water level can drop a maximum
100mm as water drains from the inner to the outer bowl.
The level of water may then appear too low for your wash
load, but closing the lid will start the recirculation pump and
the water level will return to the working level, ie. rise by a
maximum 100mm.
If you are using program settings where the recirculation
system is not active, the water level will not change when
you open the lid.
Temp. button
Press the Temp. button to set the wash water
temperature.
There are 5 temperatures to choose from:
så(OT
så4EMPERATUREåBETWEENåHOTåANDåWARM
så7ARM
så4EMPERATUREåBETWEENåWARMåANDåCOLD
så#OLD
Press the Temp. button repeatedly until the temperature you
want is highlighted with an indicator light.
A sensor in the machine measures incoming water
temperatures and controls the entry of water to achieve the
selected wash temperature. The hot and cold water valves
may open together or independantly.
tips and information
så å9OUåMAYåBEåLIMITEDåINåYOURåWASHåTEMPERATUREåCHOICEå
by the wash program selection made. For example,
you will not be able to select hot water when the wool
program is selected.
så å)FåYOUåHAVEåAåCOLDåWATERåCONNECTIONåONLYåANDåTHEåHOTå
valve is capped off, you must select cold washes
only, or the machine will sense the unavailability of
hot for washes other than cold and shutdown. (Refer
Installations instructions).
så å!LLåRINSEåWATERåTEMPERATURESåAREåCOLDåEXCEPTåFORåTHEå
WOOLåWASHåPROGRAMå7OOLåHASåAåWARMåWASHåANDåAå
warm rinse.
så å#OMPONENTSåINåTHEåWASHINGåMACHINEåAREåDESIGNEDåTOå
be used with water no hotter than 70°C. You should
have a temperature limiting valve fitted by a qualified
plumber if your water supply is too hot.
Operating your washing machine
8 operating your washing machine electrolux water aid washing machine
Digital display
shows
followed
by
then program time
is shown. eg.
sequence repeats
until end of sensing
Recirculation
pump on
Recirculation
pump off
100mm