Electrolux EWF12680W Washer User Manual


 
10 electrolux
Programme Option button
Depending on the programme, different
functions can be combined. These must
be selected after choosing the desired
programme and before depressing the
Start/Pause button.
When these buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot
lights go out.
Select the temperature required
Press this button repeatedly to increase
or decrease the temperature, if you want
your laundry to be washed at a
temperature different from the one
proposed by the washing machine.
Maximum temperatures are 90°C for
cottons, 60°C for synthetics, 40°C for
delicates, wool, fabrics to be
handwashed and lingerie, 30°C for silk,
while corresponds to cold wash.
Select the spin speed or No Spin or
Night Cycle or Rinse Hold option
Press the Spin button repeatedly to
change the spin speed, if you want your
laundry to be spun at a speed different
from the one proposed by the washing
machine. The relevant light will light up.
Maximum speeds are:
Cottons: 1200, 1400 rpm depending
on the Model
Wool, Handwash : 1000 rpm
Synthetics: 900 rpm;
Delicates and Silk: 700 rpm.
No spin : by selecting this option,
the machine will suppress all spinning
phases. On cotton and synthetic
programmes the rinses witll be
performed with more water.
Night Cycle : by selecting this
option, the machine will not drain the
water of the last rinse, so as not to
crease the laundry.
As all spinning phases are suppressed,
this washing cycle is very noiseless and
it can be selectionned at night or in
times with a more economical power
rate. On cotton and synthetic
programmes the rinses will be
performed with more water.
When the programme has finished the
"Door" icon is alight, the Start/Pause
light is off and the door is blocked to
indicate that the water must be
emptied out.
To do this:
turn the programme selector dial to Off
select the Drain or Spin programme
reduce the spin speed if needed, by
means of the relevant button
depress Start/Pause button
only the “End” pilot lights illuminates.
Rinse Hold : by selecting this
option the water of the last rinse is not
emptied out to prevent the fabrics from
creasing. When the programme has
finished "Door" icon is alight, the
Start/Pause light is off and the door is
blocked to indicate that the water must
be emptied out.
To empty out the water, please read
the previous option steps.
126.2931.14…EWF12680-14680W.qxd 28/10/08 13:39 Página 10