Filter
Top Products
7
6 “Quick wash” button
This option can be used for lightly soiled cotton,
synthetic or delicate items hat have been used or worn
for a short time.
This option is not available with the (Wool)
/Handwash programme, the Energy saving
programmes (E60° and E40°) and Miniprogram.
7 “Night cycle” button
When you choose this option, the machine will not
drain the water of the last rinse, so as not to crease the
laundry.
As all spinning phases are suppressed, this washing
cycle is very quiet and it can be selected at night or in
times with a more economical power rate.
On cotton and synthetic programmes the rinses will be
performed with more water.
To complete the cycle, choose one of the following
programmes:
• Drain
To drain the water select Drain programme by means of
the selector dial, then press the Start/Pause button.
• Spin
To spin the laundry choose “Spin”programme by means
of the selector dial; select spin speed by means of Spin
speed button and then press the Start/Pause button.
Important!
Before choosing the programme Drain or Spin the
selector dial has to be positioned on “Off”.
8 “Sensitive” button
By depressing this button the washing intensity will be
reduced. The machine adds one rinse in the programmes
for Cotton and Synthetics. This option cannot be used
with “Delicates”, “Easy Iron” and “
Miniprogram”
programmes.
This option is recommended for people who are allergic
to detergents and in areas where the water is very soft.
9 “Drying Time” button
By depressing this button you can select the desired
drying time according to the fabrics (cotton or
synthetics) you have to dry.
To select the drying time you have to push the button
until the drying time you want appears in the display.
For Cotton and Synthetics you can select a time from 10
to 130 minutes.
For automatic Washing & Drying programmes the
drying time is displayed for 3 seconds, then the duration
of the programme will appear.
10 “Delay start” button
The wash programme can be delayed from 30 min - 60
min - 90 min, 2 hours and then by 1 hour up to a
maximum of 23 hours by means of this button.
Selecting the delayed start
● Select the programme and the required options.
● Select the delay start.
● Depress Start/Pause button: the machine starts its
countdown.
The programme will start after the selected delay has
expired. The Delay Start cannot be used with
Drain or
Spin programmes.
Cancelling the delayed start (after you have already
pressed the Start/Pause button)
● Depress Start/Pause button.
● Depress Delay Start button until «
00 ’’
» is displayed.
● Depress Start/Pause button again, if you wish to
restart the machine immediately.
11 “Start/Pause” button
This button has two functions: Start - Pause
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
Pause
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts
to flash.
To restart the programme from the point at which it was
interrupted, press the Start/Pause button again.
12 Display
The display shows the following information:
Reset/Cancelling - Duration of the programme -
Drying time - Delayed start - Incorrect option
selection - Alarm code - End of programme