Filter
Top Products
9
15 Programme selector dial
The selector is divided into 5 sections:
• Cotton, linen
• Synthetics
• Delicates
• Woollens (hand washing)
• Special programmes
• Reset programme X
The selector dial can be turned either clockwise or
anticlockwise.
Position E corresponds to the ENERGY SAVING
programme and position to “cold wash”.
At the end of the programme the selector dial must
be turned to position X (reset).
Functions
Pilot lights
Depending on the programme, different functions can
be combined.
When the relevant buttons are pressed, the
corresponding pilot lights come on.
When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the pilot light flashes
for about 2 seconds and the message Err is displayed.
End of programme
The door can be opened when the light (END) on
the programme progress display illuminates.
A flashing zero appears on the display.
Turn the programme selector dial to
X.
Switch the machine off and remove the laundry.
Altering a programme
You can alter the programme before it starts.
When the programme has started, you can only reset it
by turning the programme selector dial to
X and then
you can select the new programme.
Start it by depressing the START/PAUSE button .
95º
E
60º
40º
30º
40º
30º
40º
X
30º
50º
40º
30º
60º
50º
Interrupting a programme
Depress the START/PAUSE button to interrupt a
programme which is running, the corresponding light
starts to flash.
Cancelling a programme
Turn the selector dial to
X to cancel a programme which
is running: three flashing dashes appear on the display.
Now you can select a new programme.
Opening the door after the programme has started
First set the machine to PAUSE by pressing the
START/PAUSE button .
If the door does not open, this means that the machine is
already heating or drying, that the water level is above
the bottom edge of the door or that the drum is turning.
During drying the door can be opened only the first 10
minutes and at the end of drying (after the cooling
phase).
If you cannot open the door but you need to open it you
have to switch the machine off by depressing the
ON/OFF button . After about 3 minutes the door can
be opened (pay attention to the temperature and level
of the water!). To restart the programme depress
ON/OFF button again after closing the door.
Programme information
= Wool / Hand wash
Washing programme for machine washable wool as
well as for hand washable woollens and delicate fabrics
with the “hand washing” care symbol.
= Soak
Select this programme for heavily soiled laundry.
Pour the detergent into the compartment .
This programme is not suitable for wool.
The machine performs a soak at 30°C and stops with
the water in the drum. The water can be emptied out in
2 ways:
• Draining only by depressing the START/PAUSE
button .
• Draining and spin: turn the programme selector dial
to
X, select programme (spin), reduce eventually
the spin speed by means of button and depress
START/PAUSE button.
Important!
• If the water is not emptied out within 18 hours, the
machine empties automatically.
132993670.qxd 1/13/03 3:23 PM Pagina 9 (Nero/Process Black pellicola)