Filter
Top Products
8
After starting the programme, the remaining time is
updated every minute.
Delayed start
The selected delay (24 hours max) set by means of the
relevant button appears on the display for 3 seconds,
then the duration of the previously selected programme
is displayed.
The countdown is updated every hour.
Incorrect option selection
If an option which is not compatible with the set wash
programme is selected, the message Err is displayed.
Alarm codes
In the event of operating problems, some alarm codes
can be displayed, for example E20 (see paragraph
“Something not working”).
E20
13 Start / Pause Button
This button has three functions:
Start - Pause - Draining of water.
Start
After having selected the required programme, press this
button to start the machine; the corresponding pilot light
stops flashing.
If you have selected the delayed start, the machine
begins its countdown. The duration of the programme or
the delay appears on the display.
Pause
To interrupt a programme which is running, depress the
Start/Pause button: the corresponding pilot light starts to
flash.
To restart the programme from the point at which it was
interrupted, press the START/PAUSE button again.
Draining of water
By depressing the Start/Pause button
• The water of programme is emptied out
• The water of the last rinse on programmes with Rinse
hold option is emptied out and the laundry is
spun.
14 Programme progress display
By selecting the wash programme, the pilot lights
corresponding to the various phases making up the
programme come on.
After the machine has started, only the running phase
pilot light stays on. When the programme has finished,
the End pilot light comes on.
MAIN WASH
RINSE HOLD
RINSES
END
SPIN
PREWASH
DRYING
DRAIN
132993670.qxd 1/13/03 3:23 PM Pagina 8 (Nero/Process Black pellicola)