Filter
Top Products
15
ENGLISH
Place the discharging hose in a washbasin or sink
with the aid of the bent piece delivered separately. The
bent piece has to be entered into the tube’s mouth in
order to assure the support. Aforesaid piece allows
the hose to be fixed to the wall by means of an
opening on the upper part and that way the hose does
not move and its falling is avoided.
Hydraulic connection
Connect the water inlet hose to a tap with a 3/4"
thread.
Do not use already employed employed hoses.
The other end of the inlet hose which connects to the
machine can be turned in any direction. Simply
loosen the fitting, rotate the hose and retighten the
fitting, making sure there are no water leaks
The inlet hose must not be lengthened. If it is too
short and you do not wish to move the tap, you will
have to purchase a new, longer hose specially
designed for this type of use.
P0021
P0022
AL013