Filter
Top Products
12
4. The water inlet hose filter
If you notice that the machine is taking longer to fill,
check that the filter in the water inlet hose is not blocked.
Turn off the water tap.
Unscrew the hose from the tap.
Clean the filter with a stiff brush.
Screw the hose back onto the tap.
5. Emergency emptying out
If the water is not discharged (outlet pump is blocked,
filter or drain hose are clogged), proceed as follows to
empty out the machine:
• pull out the plug from the power socket;
• close the water tap;
• if necessary, wait until the water has cooled down;
• open the drainage area door;
• place a bowl to collect the water;
• release the emergency emptying hose, place it in the
bowl and remove its cap, when the bowl is full put the
cap back on the emergency emptying hose;
• empty the bowl, repeat the procedure until you have
completely emptied the washing machine;
• replace the emergency emptying hose in its initial
position and close the drainage area door.