Filter
Top Products
7.
Unscrew cover plates E from the
front of the machine, rotate
through 180°, screw on the oppo-
site side.
8.
Unscrew door lock F, push down
slightly and remove from the front
of the machine.
9. Disconnect cable connector from
door lock F.
10.
Press snap-in button G in and
down, press cover down slightly
and remove from front of the ma-
chine.
11. Disconnect cable connector from
cover G.
12.
Change door lock F over to the opposite side, insert the cable connector and
screw down the door interlock.
13. On the other side, insert the cable connector in cover G, insert cover and allow
snap-in button to lock into place.
14. Insert loading door and hinges into recesses on the front of the machine and
screw down.
Note regarding contact protection:The machine is only secure for operations
again once all plastic parts have been inserted.
Special accessories
Intermediate installation kit for stacked washer and dryer:
Available from your Service Force Centre or your specialist dealer
These intermediate installation kits can be used to arrange the dryer and an
automatic AEG-Electrolux washing machine (60cm wide, front loading) as a space-
saving washer/dryer stack. The automatic washing machine is at the bottom and
the dryer is at the top.
Version to be supplied:
– with extractable stacker plate 916.018 903
Read carefully the instructions supplied with the kit.
E
E
F
F
G
G
38
Installation