19
Cleaning the drum
1 Caution! Do not use abrasives or steel wool to clean the drum.
3 Lime in the water or cleaning agents may form a barely visible lining on
the inside of the drum. The degree to which the laundry has been dried
is then no longer detected reliably. The laundry is damper than expect-
ed when removed from the dryer.
Use a damp cloth, which has been soaked in water and a little vinegar,
to wipe the inside of the drum and drum ribs.
Clean operating screen and housing
1 Caution! Do not use furniture cleaners or aggressive cleaning agents to
clean the machine.
Use a damp cloth to wipe down the operating screen and housing.
What to do if…?
Troubleshooting by yourself
If, during operation, the dryer shows an error display (one or more dis-
plays flashing on the programme progress display), check first of all
whether you can remedy the problem yourself by means of the table
below. If you cannot solve the problem: Switch the machine off and on
again. Reset programme. Press the START/PAUSE button.
If the error display is still shown, please contact your local Service Force
Centre and inform about flashing displays.
Problem Possible cause Remedy
Dryer does not work.
Mains plug is not plugged in
or fuse is not working cor-
rectly.
Plug in at mains socket. Check
fuse in fuse box (domestic in-
stallation).
Loading door is open. Close loading door.
Have you pressed the START/
PAUSE button?
Press the START/PAUSE button
again.