Electrolux 51165 Washer User Manual


 
Operating Instructions
32
If the washing results are not satisfactory
If the washing has turned grey and if limescale is deposited in the
drum, then
Too little detergent was used.
The wrong detergent was used.
Special soiling was not pre-treated.
Program or temperature not set correctly.
If multi-component detergents are used, the individual components
were not used in the correct ratio.
If there are still grey spots on the washing,
Washing soiled with ointments, grease or oils was washed with too
little detergent.
Too lower temperature was used for washing.
A frequent cause is that softener - particularly that in concentrated
form - has reached the washing. Wash out such spots quickly and use
the softener concerned carefully.
If at the end of the last rinse foam is still visible
Modern detergents can also cause foam in the last rinse. However,
the washing is still sufficiently rinsed.
If there are white remnants on the washing
These are insoluble components of modern detergents. They are not
the result of an insufficient rinsing effect.
Shake or brush out the washing. In future, perhaps you should turn
the washing inside out before washing it. Examine your choice of de-
tergent and if necessary use liquid detergent.