Electrolux 137018200 A Clothes Dryer User Manual


  Open as PDF
of 26
 
18
Installation Instructions
Performing Installation Cycle
If your dryer has this console:
If your dryer has this console:
Empty the dryer drum.1.
After you plug in the dryer the first time: wake up the dryer by pressing any button, rotate cycle knob 2.
to touch up cycle, press the start button and then the cancel button.
Wake up the dryer again by pressing any button, then immediately and simultaneously press and hold 3.
both the sanitize and my favorite buttons for 5 seconds, or until the LCD display changes.
The LCD window will display 4. INSTAL CYCLEandshowestimatedtimeofcyclecompletion.Pressthe
startbutton.TheInstallationCyclewillautomaticallytestforcorrectcordconnection(onelectricmod-
els)andpresenceofgassupply(ongasmodels).Atcyclecompletion,theLCDwindowmaydisplay
INSTAL PASS!, meaning your new dryer is properly installed and ready for use. If it prompts an action
such as SERVICE CORD, NO GAS or call service 877 435 3287, review the installation steps and make the
necessary corrections before you attempt to use the dryer.
YourdryerwillexittheInstallationCycleandreturntonormaloperationthenexttimeyouwakeitup.5.
WARNING
FIREHAZARD
Beforeoperatingthedryer,makesurethedryer
area is clear and free of combustible materials,
gasoline, and other flammable vapors. Also
seethatnothing(suchasboxes,clothing,etc.)
obstructs the flow of combustion and ventilation air.
NOTE
On gas dryers, before the burner will light, it is
necessary for the gas line to be bled of air. If the
burner does not light within 45 seconds the first
time the dryer is turned on, the safety switch will
shut the burner off. If this happens, press cancel
and wait 5 minutes before making another
attempt to light.
After you plug in the dryer the first time: wake up the dryer by pressing any button and follow the 1.
prompts on the LCD User Interface, including language selection.
TheInstallationCyclewillautomaticallytestforcorrectcordconnection(onelectricmodels),pres-2.
enceofgassupply(ongasmodels)andfreeowofexhaustvent.Atcyclecompletion,theLCDuser
interface may display INSTAL PASS!, meaning your new dryer is properly installed and ready for use. If
it prompts an action such as SERVICE CORD, NO GAS or call service 877 435 3287, review the installation
steps and make the necessary corrections before you attempt to use the dryer.
YourdryerwillexittheInstallationCycleandreturntonormaloperationthenexttimeyouwakeitup.3.
NOTE
Dryer will stay awake for 3 minutes after the Installation Cycle. If you wish to
immediately run the dryer through a drying cycle, press the cancel button to put the
unit to sleep and then rewake it immediately to continue the normal operating mode.
NOTE
Dryer will stay awake for 3 minutes after the Installation Cycle. If you wish to
immediately run the dryer through a drying cycle, press the cancel button to put the
unit to sleep and then rewake it immediately to continue the normal operating mode.
Pleasereadthe6. Use & Care Guideandenjoyyournewpremiumdryer!
Pleasereadthe4. Use & Care Guideandenjoyyournewpremiumdryer!
 previous next