Filter
Top Products
PAGE 7 OF24
SAFETY LOCK
When activated, the Safety lock prevents accidental operation of the
machine.
Activating the lock:
Press Time Save and Time Delay buttons simultaneously.
In Safety Lock mode, no other button will function except the Power
ON / OFF button.
The Safety lock is cancelled when the power is switched off.
De-activating the Safety lock while there is power to the machine.
Press Time Save and Time Delay buttons simultaneously once more.
Safety lock
TIME SAVE TIME DELAY
START / PAUSE
CHANGE
PROGRAMME
AS
DESIRED
START / PAUSE
TIME SAVE TIME DELAY
To change a programme while the safety lock is on.
Press both the Time save and Time delay buttons simultaneously .
Press the Start hold button
Set the desired programme.
Press the Start hold button once more.
Operating the machine
SORTING THE LAUNDRY
Sort the laundry in one of the following groups:
White cotton and linen as well as robust colourfast fabrics.
Synthetics and synthetic blends as well as non colourfast fabrics.
Delicate fabrics such as silks and rayon.
Wool
GETTING READY
Open the cold water tap.
Switch the power on at the wall socket.
LOADING THE MACHINE
Open the door and load the laundry into the drum. It is important not to overload the machine as this
will prevent it from washing properly. You should be able to fit a hand between the top of the drum
and the wash load in the drum. Items should be able to move easily through the wash water for best
cleaning and wrinkle-free results
Close the door.
Add detergent as required for Pre-wash, and or Main wash.
Add Softener to just below the MAX level.
TIME DELAY
This allows a programme to start later in the day. The start may be delayed by 2 to 12 hours
1. Switch the water tap on , add detergent and load the washing. Close the door.
2. Select a programme
3. Press the Time Delay button
4. Adjust the time . Each press of the Time Delay button delays the start time by 1 hour
5. Press the Start/Hold button
6. The machine will start the selected programme at the selected (delayed ) time
7. To cancel the Time Delay, press the Power button.