Filter
Top Products
FOR THREADED TAPS
Connect the inlet hose to the
tap by turning the connector.
If necessary use the
connector inlet supplied
Attach the other
end of the hose to
the machine inlet
HOSE
CONNECTOR
WASHER
CONNECTOR INLET
CONNECTOR
HOSE
WASHE
R
Open the water taps and check for any leaks. Tighten fittings if necessary.
ELECTRICAL INSTALLATION
• The washing machine is designed to operate on a 230 Volt, 50 Hz, 15 Amp, AC power
supply.
• The machine should be connected to an earthed 3 pin wall socket.
• If the power-cord should ever need replacing, use only a genuine cord available from
the nearest Defy Service Centre.
The appliance must be earthed and the manufacturer and seller do not
accept responsibility for any damage due to incorrect electrical connection.