Danby DCD5505W-1 Clothes Dryer User Manual


 
INSTALLATION INSTRUCTIONS
Instructions for Use
6
Positioning and Installation
Your clothes dryer must be placed in a room with
adequate ventilation.
Choosing the Right Place
The most appropriate space is a room with a
window or built-in ventilation fan (Figure 1).
In closed, smaller rooms without adequate
ventilation there is too much moisture in the air,
the drying time is increased and so is energy
consumption.
If during the drying procedure there isn't
adequate ventilation in the room, we recommend
you direct moist air out in the open by means of
vent pipe (Fig. 2).
2
1
Vent pipe can be bought in any local hardware
store.
Positioning
This dryer is a self standing appliance and can
stand alone, or it can be placed either together
with a washing machine or in the kitchen as a
kitchen unit.
If the floor is uneven, use the adjustable feet to
level the machine.
3
3a
Undo the nuts. Rotate the feet to level the
machine (fig. 3).
Lock the nuts (fig. 3a).
Do not remove the adjustable feet. The
machine must be placed horizontally.
Do not put the dryer on a thick rug thus
preventing the possibility of air circulation.
Moist Air Outlet
The ventilation opening for venting out humid air,
is located at the rear side of the dryer. Fig. 4-5
(bottom left-hand corner) The ventilation opening
is designed to accept standard 4 inch, flexible or
solid exhaust pipe. (not included with the dryer)
The ventilation exhaust can be purchased at any
local hardware store.
The distance between the dryer and venting
opening (air duct or window) must not exceed 80
inches, otherwise condensation can accumulate
in the tube, (Fig 5).
1 Solid Piping
2 Flexible pipe