Filter
Top Products
USER-MAINTENANCE INSTRUCTIONS
Instructions for Use
16
Filter
The lint filter is located under the cap at the
bottom of the machine.
If you use the machine correctly, there is no need
to clean the filter.
However, we suggest you check (clean) the filter
periodically to make sure foreign objects have
not become trapped inside. (Fig. 17 & 18)
A partially blocked filter will restrict pumping out
of the wash water.
Before attempting to clean the filter, make sure
the wash/rinse water has been completely
drained from the machine. The best method to do
that is to place the drain hose as low as possible
(to the floor) next to a floor drain.
− Remove the cover (with coin inserted into the
notch (fig. 17).
− Insert the funnel attached to the machine into
the bottom cut-outs between the filter cover
and cabinet and fix it by turning clockwise.
− Place a shallow pan underneath to allow the
excess water to pour out. Remove the filter, by
turning it counter-clockwise (35-40°) (fig. 18).
− Replace the filter in the reverse order and
screw it down firmly. Check it for sealing prior
to washing.
17
18