Filter
Top Products
OPERATING INSTRUCTIONS
Instructions for Use
12
Washing
Before washing, select a wash program that best
suits your washload.
The control panel incorporates various switches
and pushbuttons for selecting washing programs,
a control light, and a dispenser.
This instruction manual was prepared for various
models of washing machine. Note: some functions
may not be applicable to your specific model.
Control Light
A control light illuminates when the machine is
switched on.
Program Selection Knob
To select a program, make sure the machine is
switched off. Turn the knob clockwise to the
required program.
Washing programs are divided into three groups
and are marked with letters A ~ M (Fig. A).
Regular cycle
Programs for non-delicates (A-F)
Intensive programs concluded with a prolonged
spin cycle of highest number of revolutions.
Permanent press cycle
Programs for delicates (G-L)
Gentle tumbling programs concluded with short
stage spinning.
Woolens, delicate cycle
Program for Woolens (M)
Gentle tumbling programs concluded with short
stage spinning. Program uses high water level
and gentle tumbling and concludes with a short
stage spinning.
Temperature Selection Knob
Turn the knob clockwise (Fig. B).
Washing temperature may be optionally selected
up to 200°F.
Programs from A to B may be used as economic
program, if the selected temperature is lower
than 200°F. This feature will help you save
energy up to 40%.
On the position marked with a snow flake, the
heaters are switched off and you can select cold
wash on all programs. The duration of the
program is the same as if the heaters are on.
Spinning Speed Selection Knob
Spinning speed is selected by turning the knob
clockwise up to the highest position and
backwards (Fig. C). Available settings 500, 700,
900, 1000rpm
A lower number of revolutions are recommended
for washing delicate laundry. A higher number of
revolutions are recommended for woolens,
cottons and linens.
ON/OFF switch
Select suitable washing program, prepare
the laundry for washing and press the
ON/OFF switch to switch the machine on.
Spinning-OFF Knob
Using this switch the intermediary and final
spinning of all programs are switched-
OFF.
B
C
A