Filter
Top Products
16
Cleaning the Lint Filter
Cleaning the water inlet filter
• Clean the filter when water leaks from, the water inlet.
Cleaning the drain filter
• In case “U” shape drain hose, this filter’s equipped at the cack side of washer.
• This drain filter is to screen the foreign stuffs such as threads, coins, pins, buttons etc ...
• If the drain filter is not cleaned at proper time (every 10 times of use), Drain problem could be
caused. see page
! Pull the Filter frame up-
ward.
@ Turn the lint filter inside
out, wash to the lint off
with water
# Return the filter as it was,
and insert the filter frame
into the slot
! Pull the power
plug out before
cleaning it.
@ Turn off the water
supply to the
washer and
sperate the inlet
hose.
# Pull the inlet filter
out.
$ Remove the dirt
from the inlet
filter with a brush.
! Put down the remained
water in the hose. And put
a container under the filter
to collect water.
@ Turn the cap counter
clockwise.
# Pull out the filter
assembly off the case of
the main body.
$ Clean the drain filter
removing the foreign
stuffs.
% Put in the filter along the
guiding prominence of the
case. Please note the left
position of the filter
adjusting the groove to the
guide rib.
^ Turn the cap clockwise
tightly.
Filter Frame
Lint Filter
FILTER
CONTAINER
CAP
CAP
FILTER
CASE
GUIDE
RIB
SUIT
CAP
CASE
FILTER
CAP
CAP