Daewoo DWD-LD141X Washer User Manual


 
E-15
Washing procedure and program selection (cont.)
NOTE
If you want to change the setting during operation, press the Start/Pause button to hold the operation and press
the button you want.
• Only ‘Cold’, ‘30’ °C, ‘40’ °C washing temperatures are selectable with Synthetic program.
• ‘Prewash’, ‘Rinse+’ wash options are selectable with Synthetic program.
• The appropriate amount of laundry for Synthetic program is below 3kg.
1
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
Put detergent into the main wash and prewash compartments in the detergent case.
Softener should be below the ‘MAX’ level.
• Put detergent into the pre wash compartment only if you want to add prewash.
When you want to use bleach, put it into the main wash compartment with
detergent.
2
Press the Power button.
The LED shows only ‘---’ and all Program Lights turn on.
3
Select the ‘Synthetic’ program using program selection dial.
Washing temperature ‘30’ °C, spin ‘800’ rpm are selected automatically.
If you want to change washing temperature, the spin velocity or add wash options
(Prewash, Rinse+), press each button.
4
Press Start/Pause button.
The Door is locked. By sensing the weight of laundry and supplying wash water,
The appliance starts washing.
* SYNTHETIC PROGRAM