Creda W120FW Washer User Manual


 
To obtain claimed energy label
wash performance for a 60°C
cotton wash, dispense powder
detergent in a dosing ball,placed
in an upright position in the
centre of the wash load (Fig 5).
Dispensing
Powder Detergent
To achieve optimum wash
results we recommend that
you use the detergent
manufacturer’s dispensing cup
to dispense no more than 300
ml of powder (Fig 3).
Dispensing Fabric
Conditioner
Pour fabric conditioner into
compartment (Fig 4).We
recommend that you do not
exceed the maximum level
indicated.
Dispensing Liquid Detergent
Refer to detergent manufacturer’s instructions for dosage and
pour liquid into the compartment (Fig 1).
Note: The ‘Liquid Detergent’Main Wash Indicator features 3
lines which represent the dosage of liquid to be used (Fig 2).
We recommend that you do not exceed the maximum limit of
150ml.
Using a Dosing Ball
CHANGING THE MAIN
WASH INDICATOR
Pull drawer out until it
reaches its stop.
Press down on button to
release drawer latch,
remove drawer.
Lift ‘Powder’indicator
out of slots, rotate and
reposition for ‘Liquid’
ensuring it is secure.
Re-locate drawer and push
firmly back into place.
1
2
3
4
Max.– 150ml.
100ml.
50ml.
The Main Wash Indicator has
been fitted,ready to dispense
‘Powder’ detergent only.
Fig 2
Fig 3
Fig 4
Fig 5
Fig 1
WARNING
Do not dispense
detergent tablets from
the dispenser drawer.
Refer to detergent
manufacturer’s
instructions.
11