Filter
Top Products
Page 7
Page 6
STEAMING TIPS
Pressing Garments
1. Lay the garment on the ironing board.
2. Lower the pressing plate and return to the open position
after a few seconds.
Wrinkle Removal
1. Lower the steam plate until it is slightly above the ironing board.
IMPORTANT NOTE: For initial use, you may need to prime pump by squeezing the
steam burst/pressing handle 5-15 times or until there is a burst of steam.
2. Squeeze steam/pressing handle for burst of steam.
3. Repeat this process until all wrinkles have been removed.
Shirts and Blouses (Fig. 6)
1. Place the shoulder yoke on the ironing board first and press.
2. Then place the sleeves on the ironing board with the fold parallel
to the long seam and press.
3. Place the cuffs on the end of the board and press.
4. Place the body of the shirt in the storage area so that you begin
pressing the side with the pocket. Pull the shirt toward you as you
press each section.
5. Then finish with the collar.
Other Techniques
Placing a cloth between the fabric and the pressing plate may help with
delicate fabrics.
If you have older types of buttons or zippers, you may need to take
care to avoid melting. In order to do so, place the item face down and
cover with a pressing cloth before pressing.
A spray bottle may be used to spray the fabric lightly. This will further
help to remove stubborn wrinkles.
Place a damp cloth over the fabric before pressing to help with stub-
born wrinkles or heavy fabrics.
Fig. 6
07PC2250 FSP5 rev IB.indd 9-1007PC2250 FSP5 rev IB.indd 9-10 5/30/07 8:58:57 AM5/30/07 8:58:57 AM