Filter
Top Products
Page 5
Page 4
GETTING TO KNOW
YOUR STEAM PRESS
1. The steam burst/pressing handle raises and lowers the
pressing plate and controls the burst of steam feature.
2. The pressing plate is the temperature-controlled surface
that heats and presses the fabric.
3. The ironing board is the padded surface that holds
the fabric during pressing. It has a removable cover
that is washable.
4. The power indicator light illuminates when the unit is on.
5. The ON/OFF switch.
6. The green indicator light goes on when the pressing plate
has reached the selected temperature.
7. The temperature control dial.
8. Water tank.
9. Pressing plate lock.
Your Steam Press provides clean,
professional results every time!
• Pressing surface is three times larger than most
hand-held irons
• Can reduce ironing time up to 50%
• Dry and steam setting
• Variable temperature control
• Power indicator light
IMPORTANT
For Household Use Only
Filling Instructions:
Do not plug the unit in until you have filled the water tank.
1. Set the appliance on a steady work surface.
2. Raise the pressing plate.
3. Fill the water tank using distilled water.
To fill: Remove the water tank. Using a filling container (not included)
(Fig. 1), pour water into the tank. Replace by sliding tank back in. Make
sure the tank is securely placed before use.
OPERATION INSTRUCTIONS
1.Turn the power to the ON position (Fig. 2).
2. Identify the type of fabric you will press and then select the temperature
setting that matches the fabric to be pressed (Fig. 3). It is best to start with
the most delicate fabrics first, as higher heat will cause damage to nylon and
silks.
3.
The steam is ready for use when the green indicator light turns on.
Fig. 3
Fig. 1
Fig. 2
ON/OFF SWITCH
1
2
3
5
6
7
8
4
9
07PC2250 FSP5 rev IB.indd 7-807PC2250 FSP5 rev IB.indd 7-8 5/30/07 8:58:56 AM5/30/07 8:58:56 AM