Filter
Top Products
3-10 l Installation
Mounting the Dryer on the Floor
Stand; Hopper on the Throat
For information about mounting the dryer on the floor stand and the hopper on the
throat, refer to Appendix B.
Mounting the Dryer and Hopper on
the Mobile Floor Stand
For information about mounting the dryer and hopper on the mobile floor stand,
refer to Appendix B.
Connecting the Main Power
CAUTION: Always disconnect and lock out the main power sources before making
electrical connections. Electrical connections should be made only by qualified
personnel.
1 Open the dryer’s electrical enclo-
sure. Turn the disconnect dial on the
dryer door to the Off or O position.
Lock out the main power (see Page
1-4 for complete lock out informa-
tion). Turn the captive screw, and
swing the door open.
2
Insert the main power
wire
through the knockout in the side of
the enclosure. Secure the wire with
a rubber compression fitting or
strain relief.