Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
AJ1031
16
Required Materials
NOTE: Applicable codes, ordinances, specifications
and/or other governing data related to installation
must be complied with. The materials listed in
Table 4 MAY or MAY NOT conform to these
requirements.
Receiving Inspection
Press is shipped assembled and enclosed in a wood slat
crate. Upon delivery, inspect crate and contents for
shipping damage. If crate or cover is damaged, or
signs of possible damage are evident, have carrier note
condition on shipping papers BEFORE shipping
receipt is signed, or advise carrier of condition when
discovered.
Remove protective cover and check items received
against items listed on packing list. If any item is
damaged or missing, a written claim should be filed
with carrier as soon as possible.
Quantity Description Source
1 Models with timer ONLY. Lockout type fused disconnect switch suitable for
electric service connected to press (refer to wiring schematic in control box). Not
required if circuit breaker is used.
Local
As required Models with timer ONLY. Wire of suitable size, type and length to connect
electric service to press (refer to wiring schematic in control box).
Local
As required Models with timer ONLY. Flexible conduit and connections to encase wires and
make connections (refer to wiring schematic in control box).
Local
2 Steam trap and check valve, or combination steam trap/check valve sized for buck
and head steam return lines and steam consumption.
Local
3 Ball shut-off valves sized for steam supply and return lines. Local
1 Ball shut-off valve sized for air supply line. Local
4 Anchor bolts. Local
As required Pipe, couplings, unions, flanges, etc., to connect steam supply and return lines and
air supply line to press. Wall thickness of pipe and tubing must be in compliance
with recommendations by compressor and boiler manufacturers and local code
(refer to sections on Connecting Steam Supply and Returns and Connecting Air
Supply).
Local
Table 4