Filter
Top Products
SKU 98332 For technical questions, please call 1-800-444-3353. Page 8
SPECIFICATIONS
Electrical Requirements 120 V~ / 60 Hz
Fluid Capacity 20 Gallons
Maximum Flow
5.28 Gallons per
Minute
Tested at 185° F.
UNPACKING
When unpacking, check to make sure
that the item is intact and undamaged. If
any parts are missing or broken, please
call Harbor Freight Tools at the number
shown on the cover of this manual as soon
as possible.
List of contents
Description Q’ty
Middle Shelf 1
Parts Washer Tank 1
Pump with Cord and Switch 1
4
Swivel Casters 4
Work Basket 1
INSTRUCTIONS FOR
PUTTING INTO USE
Read the ENTIRE IMPORTANT
SAFETY INFORMATION
section at the beginning of this
manual including all text under
subheadings therein before set
up or use of this product.
TO PREVENT
SERIOUS INJURY
FROM ACCIDENTAL
OPERATION:
Turn the Power Switch of the
tool to its “OFF” position and
unplug the tool from its
electrical outlet before
assembling or making any
adjustments to the tool.
Note: For additional information regarding
the parts listed in the following pages,
refer to the Assembly Diagram near
the end of this manual.
Assembly
1.
Shelf (12) using Pan Screw (14)
Washer (8) and Nut (9). Tighten
loosely.
2.
the Body (7) using Screw (14) Wash-
er (8) and Nut (9). Tighten securely.
Tighten the Fasteners holding the 3.
Attach the Casters (37 and 38) to 4.
(37) should be installed on the front
of the tool, where they can be easily
reached.
Install the Pump Assembly (18) on 5.
the inside of the Body (7) using
Screws (22), Washers (31 and 32)
and Nuts (31). Ensure that the Switch
Box (21) and Electric Cord (19) are
on the outside of the Body (7). Tight-
en fasteners securely.