Filter
Top Products
Q-Wash 260-LED QRG
Page 2 of 10
About this
Guide
The Q-Wash 260-LED Quick Reference Guide (QRG) only contains
the product’s connection and mounting information, as well as the
menu options and the DMX values.
Disclaimer
This Quick Reference Guide DOES NOT replace the product’s
User Manual.
Make sure to download the latest version of the product’s User
Manual from (www.chauvetlighting.com).
You must read ALL the disclaimers and safety notes in this
document as well as those in the product’s User Manual before
installing, operating, or maintaining this product.
Safety Notes
DO NOT open this product unless instructed. It contains no user
serviceable parts.
DO NOT look at the light source when this product is on.
DO NOT touch the product when it is operating because it may
be hot.
DO NOT cover the ventilation slots when the product is
operating to avoid internal overheating.
DO NOT install or operate this product where there is less than
50 cm to the nearest surface to allow adequate ventilation around
it.
DO NOT leave any flammable material within 50 cm from this
product while operating or connected to the power outlet to
minimize the risk of fire.
DO NOT carry this product from the head. Use the handles
instead.
DO NOT mount this product overhead without using a safety
cable.
DO NOT operate this product outdoors or in any location where
dust, excessive heat, water, or humidity may affect it.
DO NOT operate this product if you see damage on the housing,
lenses, or cables. In any of these cases, have the damaged parts
replaced by an authorized technician at once.
DO NOT connect this product to a dimmer or rheostat.
ONLY connect this product to a grounded and protected circuit.
What is
Included
One Q-Wash 260-LED
One locking IEC to Edison plug input power cord (US market)
Two hanging brackets
Four M8 bolts (6 mm head)
One safety cable
One custom cut, removable 1° Color Blending Filter
One Warranty Card
One Quick Reference Guide