Filter
Top Products
PROGRAMME selector with "OFF" position
Rotates in both directions.
The machine is turned on by selecting a
programme via the programme selector.
This status will be indicated by the
"STOP" indicator light flashing, this light
will continue to flash until the machine
has started or the machine is returned to
the "OFF" position.
Press the "Start/Pause" button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
Switch off the washing machine by turning the selector to "OFF".
Note:
The programme selector must be returned to the "OFF" position
at the end of each cycle or when starting a subsequent wash
cycle prior to the next programme being selected and started.
N
11
Buttons indicator light
The indicator light around the option buttons will light when specific options are selected.
M
TIME TO END indicator light
In order to manage your time better, this washing machine features an indicator light system
that keeps you constantly informed on the remaining cycle time.
Indicator light START:
Remaining time above 60 minutes.
Indicator light 60:
Remaining time less than 60 minutes.
Indicator light 30:
Remaining time less than 30 minutes.
Indicator light 15:
Remaining time less than 15 minutes.
Indicator light STOP:
End of the programme.
L
10
WASH TEMPERATURE CONTROL KNOB
ROTATES IN BOTH DIRECTIONS
With this device it is possible to reduce, but no increase
washing cycle temperature.
The table of programmes indicate the maximum temperature
advised for each type of wash.
WARNING: THIS TEMPERATURE MUST NEVER BE
EXCEEDED
I
VARIABLE SPIN SPEED selector
Can be turned in either direction
The spin stage plays a very important role in preparing the
laundry for efficient drying and your model offers maximum
flexibility to suit all your requirements.
The selector can be turned to reduce the maximum spin
speed, right up to eliminating the spin completely (position ).
In programmes for mixed fibres, synthetics and delicates,
the washing machine automatically lowers the spin speed.
In order not to damage fabrics, it is not possible to increase this spin speeds.
Note: this model is fitted with an electronic device that
checks the load is balanced correctly. If the load is slightly
unbalanced the machine will re-balance it automatically to carry
out the normal spin.
If, after several attempts, balance is not restored, a reduced spin
speed will be used.
If loads are seriously unbalanced the spin stage will be cancelled.
This helps limit vibration, reduce noise output and improve the
washing machine’s lifespan.
H